CasperJS needs PhantomJS 1.9. My RPM will download this dependency for you.
RPM's are available for Centos 6 and 7. And you can find it if you type yum search casperjs.
Thanks to the VoIP we can link remote places and communicate with us at the lowest cost possible. VoIP companies know that, and it is one of the biggest reasons why this industry has been growing.
If you are already educated about VoIP, you have for sure read about SIP and RTP. There are other protocols, but I will focus on these two as they are the most common. The SIP is used to do the signalling while the RTP carriers the sound; SIP has many functions in the VoIP but the main one is the related to the INVITE action. The INVITE action is the one responsible to initiate the calls, it carriers all details about the call, including the Caller ID Number.
Sadly for use, the SIP does not provide any mechanism to prevent spoofing the Caller ID. This means I could (but I will not) call someone and act on someone behalf from the Parliament of Canada by setting my Caller ID to 1 866 599 4999. If you do a little search, you will find there are many frauds. Many of them related to revenue agencies.
The Government of Canada through its telecommunication body, the Canadian Radio-television and Telecommunications Commission, recognizes this danger and it has published a communicate about Measures to reduce caller identification spoofing and to determine the origins of nuisance calls.
The CRTC suggest the use of STIR and SHAKEN; however, in my experience, I believe this is not enough and it is just a poor try to cover the real risk. I will explain my line of thinking.
Nagios is a software for monitoring, it can virtually monitor anything you want as far as you know how to know how to grab data and you have clear the warning and critical ranges.
Sadly, sometimes after being on production, FreeSWITCH presents orphan calls. An orphan call is the one that it is not active; there is not actually a conversation passing through it, but it is listed with the show calls command and it might be using resources.
In this post, I will write about how to make Nagios aware of these calls.